6TL YAV904X8 기술 설명 - 페이지 4

{카테고리_이름} 6TL YAV904X8에 대한 기술 설명을 온라인으로 검색하거나 PDF를 다운로드하세요. 6TL YAV904X8 13 페이지. 4 banks 2-pole 2a 1 to 8 multiplexer

3.

DESCRIPTION

The YAV904X8 module contents 32 DPST Relays forming four banks of 2-Pole 1 to 8 ports. All
bank common pins are connected to a twin contact, which makes it easy to re-configure for the
following options:
4 x (1 to 8)
2 x (1 to 16)
1 x (1 to 32)
2 x (1 to 8) + 1 x (1 to 16)
1 x (1 to 8) + 1 x (1 to 24)
Joining two or more YAV904X8 modules the multiplexing can be increased until all test
requirements are covered.
This module is designed for the isolated switching of DMM signals. In case the system requires
high precision measurements, a two branch matrix can be configured, allowing 4-wire
measurements (resistors) and bridge excitation and measuring (for example load cells).
The board is organized in 4 groups of 8 bipolar relays, with double contact access to each
branch. Therefore, there is the possibility to set up different multiplexer configurations, adding
wiring connections inside the test fixture:
Set up
1 x 32 relay multiplexer
2 x 16 relay multiplexer
4 x 8 relay multiplexer
2 x (8 relay + 16 relay multiplexer)
1 x (8 relay + 24 relay multiplexer)
.
Connections inside the fixture
Join pin 30 to pin 36
Join pin 31 to pin 37
Join pin 63 to pin 67
Join pin 64 to pin 68
Join pin 94 to pin 5
Join pin 95 to pin 69
Join pin 30 to pin 36
Join pin 31 to pin 37
Join pin 94 to pin 5
Join pin 95 to pin 69
Default configuration
Join pin 94 to pin 5
Join pin 95 to pin 69
Join pin 63 to pin 67
Join pin 64 to pin 68
Join pin 94 to pin 5
Join pin 95 to pin 69