Dynabrade 47821 운영 및 유지보수 - 페이지 4
{카테고리_이름} Dynabrade 47821에 대한 운영 및 유지보수을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynabrade 47821 4 페이지. 2" disc sander right angle, front exhaust
페이지 인쇄
LIFETIME WARRANTY
To validate Dynabrade Lifetime Warranty, you must register each tool at: www.dynabrade.com. Registration of each tool at website is required.
Dynabrade will not honor Lifetime Warranty on unregistered tools. Please view the entire Lifetime Warranty Policy at : www.dynabrade.com.
MACHINE SPECIFICATIONS
Model
Speed
47820
12,000 RPM
.4 hp (298 W)
47821
15,000 RPM
.4 hp (298 W)
47822
20,000 RPM
.4 hp (298 W)
Additional Specifications: Air Inlet Thread 1/4" NPT • Hose I.D. 1/4" (6 mm)
Sound Level is the pressure measurement according to the method outlined in ISO regulation ISO-15744
OPTIONAL ACCESSORIES
Motor Tune-Up Kit
•
Part No. 96541
Dynaswivel
•
Part No. 94300 – 1/4" NPT.
Hex Key Wrench
•
•
Part No. 96399
Crowfoot Wrench
•
•
•
Part No. 96460
REFERENCE CONTACT INFORMATION
American National Standards Institute (ANSI)
1899 L Street, NW, 11th Floor • Washington, DC 20036 • Tel: 1 (202) 293-8020
Compressed Air & Gas Institute (CAGI)
1300 Sumner Ave. • Cleveland, OH 44115-2851
Tel: 1 (216) 241-7333 • Fax. (216) 241-0105
European Committee for Standardization (EN)
Rue de Stassart 36 • B - 1050 Brussels, Belgium
DYNABRADE, INC.
8989 Sheridan Drive • Clarence, NY 14031-1419 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
© DYNABRADE, INC., 2012
Power
Sound
Air Consumption
85 db(A)
25 SCFM (708 LPM)
85 db(A)
25 SCFM (708 LPM)
84 db(A)
25 SCFM (708 LPM)
Includes assorted parts to help
maintain and repair motor.
®
Swivels 360° at two locations
which allows an air hose to drop
straight to the floor, no matter
how the tool is held.
12 mm hex
Use in housing core
or air inlet.
3/8" Drive
34 mm
Use on throttle body, housing
core and lock nuts.
PRINTED IN USA
Air Pressure
Weight
90 PSIG (6.2 Bars)
1.1 lb. (.5 kg)
90 PSIG (6.2 Bars)
1.1 lb. (.5 kg)
90 PSIG (6.2 Bars)
1.1 lb. (.5 kg)
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
Gear Oil
•
For geared tools utilizing a wick-type
lubrication system.
•
Apply every 8 hours of operation.
Part No. 95848: 2.5 oz. (74 ml) Tube.
Lock Ring Tool
Part No. 50971
•
For removal/tightening
of 02035 Lock Nut.
International Organization of Standards (ISO)
Case postale 56 • CH-1211 Geneva 20
Tel: + 41 22 749 01 11 • Fax: + 41 22 749 09 47
Government Printing Office (GPO)
Superintendent of Documents • Attn: New Orders
P.O. Box 371954 • Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
www.dynabrade.com
Length
Height
5.9" (150 mm)
3.5" (89 mm)
5.9" (150 mm)
3.5" (89 mm)
5.9" (150 mm)
3.5" (89 mm)
Part No. 95842: 1pt. (473 ml)
Part No. 95843: 1 gal. (3.8 L)
PD12.20_06/12