Agrident APR500 매뉴얼 - 페이지 9

{카테고리_이름} Agrident APR500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Agrident APR500 14 페이지. Weight from scale
Agrident APR500에 대해서도 마찬가지입니다: 매뉴얼 (9 페이지)

APR500 – Weight from scale

Press Hotkey A in order to initiate an EID scan. This display shows:

If a transponder was read successfully, the following screen is displayed:

The first line shows the EID in a larger font size. The BT symbol on the right side indicates

that there is an active Bluetooth connection. The second line states that the scale type is

configured to Iconix and the third line that the scale should be connected via Bluetooth.

From the last line you can see that you have to press

The display shows:

If the weight was requested successfully, the following screen appears:

You can confirm the weight with

button in order to request the weight again. If you confirm the weight, the following

information screen will be displayed:

The first line shows the weight, the second the EID, the third the information "stored" and

the last one the number of stored datasets and the remaining memory capacity.

If the APR was not able to receive the weight, the following error message will occur:

Then the reader returns to the previous screen:

Please check the serial connection again and make sure that the scale settings of the

APR500 are correct.

09.03.2011

in order to request the weight.

or go back to the previous screen using the

Page 9 of 14