hi-Fun hi-Cap 사용자 설명서 - 페이지 13

{카테고리_이름} hi-Fun hi-Cap에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. hi-Fun hi-Cap 18 페이지.

REMOVE THE ELECTRONIC PART FROM hi-Cap:

1) Open the magic tape inside the cap and move the ear bud through the

hole. Remove the magic tape that holds the electronic box in the back and

remove it.

2) To reassemble the cap, perform the steps at point 1 in the reverse order.

CHARGING

Recharge completely the hi-Cap battery before use.

1) Connect the MicroUSB side of the recharging cable to charging port of

the electronic box

2) Connect the USB side of the recharging cable to a spare USB socket on

the PC or to a wall/car adapter.

3) The LED on electronic box will turn red while recharging and will turn off

when recharge is complete.

hi-Cap can not be used while recharging.

Specifications are subjected to change without notice.