Dynabrade 52401 운영, 유지보수 및 안전 지침 - 페이지 4

{카테고리_이름} Dynabrade 52401에 대한 운영, 유지보수 및 안전 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynabrade 52401 4 페이지.

페이지 인쇄
Dynabrade 52401 운영, 유지보수 및 안전 지침
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
11. Install the air motor into the 01447 Housing.
12. Carefully secure the 01447 Housing in a vise with aluminum or bronze jaws. Hold the back portion of the housing opposite the lock ring so as not to
crush the housing.
13. Install the 04078 Silencer into the lock ring.
14. Apply a small amount of the Loctite #567 to the threads of the 01447 Housing. Use the 50971 Lock Ring Wrench or an adjustable pin spanner wrench
to install the lock ring. (Torque to 34 N•m/300 in.- lbs.)
15. Install the disc pad.
Motor Assembly Complete. Tool Assembly Complete.
Throttle Lever Positioning Procedure:
1. Secure the holding flats of the valve housing in a vise with aluminum or bronze jaws so that the 01447 Housing is pointing up.
2. Slip the 01558 Collar down onto the valve housing to expose the 01461 Lock Nut.
3. With a firm hold on the 01447 Housing, use a 34 mm or an adjustable wrench to turn the 01461 Lock Nut counterclockwise to loosen the 01447 Housing
from the valve housing.
4. Orient the throttle lever to the operators desired grip and positioning. Note: Allow for additional rotation of the 01447 Housing as the 01461 Lock
Nut is tightened.
5. With a firm hold on the 01447 Housing to reduce its rotation, use a 34 mm or an adjustable wrench to tighten the 01461 Lock Nut.
(Torque to 45 N•m/400 in- lbs.)
Loctite
®
is a registered trademark of the Loctite Corp.
Dynaswivel
Swivels 360° at two locations which
allows an air hose to drop straight to
the floor, no matter how the tool is held.
•
•
50971 Lock Ring Tool
•
96346 Bearing Separator
•
96211 Bearing Removal Tool
•
96241 Bearing Press Tool
•
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2003
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade

Optional Accessories

®
94300 1/4" NPT (Composite)
95460 1/4" NPT (Aluminum)
Lock Ring Tool has a 3/8 in. square socket
for use with 3/8 in. drive; breaker bar,
ratchet head, or torque wrenches.
Use the separator to remove
bearings and gears.
This tool is used to pass through the
I.D. of the bearing plate and to push
against the I.D. of the bearing.
This tool is used to safely press a bearing
into a bearing plate or onto a shaft.
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
96044 Motor Tune-Up Kit:
•
Includes assorted parts to help maintain
and repair motor.
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
95842: 1pt. (473 ml)
95843: 1gal. (3.8 L)
96232 #2 Arbor Press
•
This arbor is ideal for the disassembly
and assembly of air motors.
95262 – 14 mm Open-end Wrench.
95281 – 19 mm Open-end Wrench.
®
DYNABRADE
PRINTED IN USA