Dynabrade 53271 안전, 운영 및 유지보수 매뉴얼

{카테고리_이름} Dynabrade 53271에 대한 안전, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynabrade 53271 4 페이지. Rebel series 7" & 9" diameter, right angle

페이지 인쇄

Rebel Series Sanders

7" & 9" Diameter, Right Angle

Safety, Operation and Maintenance – Save This Document and Educate All Personnel

Model

Wheel Dia.

RPM

53271

7" (180 mm)

8,500

53273

9" (230 mm)

6,500

SANDER

Find The Most Current Offering of Support Documents and Accessories at www.Dynabrade.com

Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel as

well as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Standards Institute (ANSI).

Safety Requirements for abrading materials with coated abrasive systems – ANSI B7.7, Compressed Air and Gas Institute (CAGI) Safety

Code for Portable Air Tools – B186.1, Code of Federal Regulation – CFR 29 Part 1910, International Organization for Standardization (ISO)

Hand Held Non-Electric Power Tools – Safety Requirements and applicable State and Local Regulations.

Read and understand tool manual before work starts

to reduce risk of injury to operator, visitors, and tool.

Ear protection to be worn when exposure to sound,

exceeds the limits of applicable Federal, State or

local statues, ordinances and/or regulations.

Respiratory protection to be used when exposed to

contaminants that exceed the applicable threshold

limit values required by law.

Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects

or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints

• Crystalline silica from bricks and cement and other masonry products

• Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Carefully Read and Understand the General

and Sander sections found in Tool Safety and

Operating Guidelines (PN00001676) Before

Handling or Using Tool.

Tool Intent: Rebel Series Sanders are ideal for material removal using depressed center grinding wheels, or abrasive

flap discs. Follow Rebel Series Sanders back-up pad mounting instructions included with the tool.

DO NOT USE Tool for Anything Other Than Its Intended Applications.

Training: Proper care, maintenance, and storage of your air tool will maximize tools performance and reduce chance for accident.

Employer's Responsibility: Provide operators with safety instructions and training for safe use of tools and accessories.

Report to Your Supervisor any Condition of the Tool, Accessories or Operation you Consider Unsafe.

Autobalancer

Yes

2.8

WARNING

SAFETY and OPERATING INSTRUCTIONS

Eye protection must be worn at all times, eye

protection to conform to ANSI Z87.1.

Practice safety requirements. Work alert, have proper

attire, and do not operate tools under the influence

of alcohol or drugs.

Air line hazard, pressurized supply lines and flexible

hoses can cause serious injury. Do not use damaged,

frayed or deteriorated air hoses and fittings.

Carefully Read all instructions before operating or servicing

any Dynabrade

Abrasive Power Tool. Products offered by

Dynabrade are not to be modified, converted or otherwise

altered from the original design.

PD17-16

August, 2017