7 A.M. Enfant PLUSHPOD 사용자 설명서 - 페이지 2
{카테고리_이름} 7 A.M. Enfant PLUSHPOD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 7 A.M. Enfant PLUSHPOD 2 페이지.
페이지 인쇄FRONT
HOW TO USE ON STROLLER
HOW TO USE ON CARSEAT
HOW TO ONLY USE FRONT PANEL COVER
On Stroller
On Car Seat
WARNING:
Never leave child unattended in this product. Make sure that the child's face is not covered by any part of this product. Child should never be placed face-down in this product. Do not use this
product as sleepwear or bedding. The child should not put buttons, plastic ends, snaps or other parts of this product into her/his mouth. Always use care when using zippers to avoid injury to the child.
User Manual
PLUSHPOD
HOOK & LOOP
CLOSURE
SOFT PLUSH LINING
FLUFFY CUSHY FLAP
BREATHABLE WATER
REPELLANT SHELL
ZIPPERED POCKET
PANEL COVER ONLY
Place the PlushPOD onto the
1
3
stroller.
Optional: Slip the pouch located
2
behind the hood over the top of the
stroller to secure the PlushPOD's
4
stability.
1
1
Seat your child in the stroller or car
seat and fasten the safety harness as
per their manufacturer's instructions.
Unzip the front panel cover. Save the
2
PlushPOD's back for later use.
Slip the front panel's inner bottom
3
pouch over the bottom of the stroller
or car seat to secure the cover.
The PlushPOD is machine washable. The care label is
located on the internal side of the product.
Use the hook & loop straps located
5
Pull the stroller's 5-point harness
on the sides of the PlushPOD to
through the opening slits located on
attach to the stroller's back or
the back of the PlushPOD by choosing
sidebars in order to secure it.
the height of the slits corresponding
to your child's size.
Unzip the PlushPOD cover.
Seat your child on the PlushPOD in the
6
stroller and fasten the safety harness
as per manufacturer's instructions.
Detach the removable back panel to
2
Place the PlushPOD onto the car seat
reveal the large back opening and to
and unzip the front panel to open the
eliminate material between your
PlushPOD.
baby's back and the car seat. Store it
Pull the car seat's 5-point harness
3
for stroller use.
through the large back opening.
Pull the elastic drawstring under the
4
pouch to adjust tightness.
2
1
REMOVABLE
PANEL
4
3
5
BACK
HOOK & LOOK STRAPS
Zip the PlushPOD cover up and adjust
7
the snugness using the elastic
drawstring located underneath the
top flap to create a smaller
enclosure around your child's face.
To further envelop your child's head,
8
connect the side flaps to the hood
with the hook & loop fasteners.
4
Seat your child on the PlushPOD in
the car seat and fasten the safety
harness as per manufacturer's
instructions.
5
Zip the PlushPOD cover up.
Use the hook & loop straps located on
5
the sides of the front panel cover to
attach to sidebars.
6
Use the elastic drawstring located
underneath the top flap to adjust the
snugness.
HOOD
HOOK & LOOP STRAPS
5-POINT HARNESS
OPENING
3 ADAPTABLE SHOULDER
HARNESS SLITS
2 ADAPTABLE CROTCH
HARNESS SLITS
ANTI SLIP BACK