Great Little Trading Alba L4465 매뉴얼 - 페이지 5
{카테고리_이름} Great Little Trading Alba L4465에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Alba L4465 7 페이지. Regular divider unit, white
페이지 인쇄
STEP 3:
Take panel A and insert 4x wooden dowels (#2) into the holes at the edges
of the panel as shown. Position with the grooved edge on the floor and the
protruding end pointing in the same direction as the large drill holes on the
underside of panels C & D (towards the base).
Connect the C/D/E panel framework with the side panel.
Insert 2x cam locks (#3) into the large drill holes on BOTH panels C & D and
turn clockwise to secure.
#2
TOP
C
Hardware for Step 3:
4x #2 Wooden Dowels
Using Cam Locks:
When inserting into the panel, ensure that each cam lock's arrow
is pointing towards the drill hole on the side edge of the panel
& the dowel that it will be receiving. When the panels are in the
connected position, using a screwdriver, turn the cam lock in a
4x #3 Cam Locks
clockwise direction to lock and secure.
#2
#3
A
#2
#2
#3
#3
E
#2
D
#3
#3
Hardware for Step 4:
4x #2 Wooden Dowels
4x #3 Cam Locks
TOP
BASE
STEP 4:
Repeat step 3 to fix side panel B, again ensuring the panel is positioned with the
grooved edge on the floor and the protruding end pointing in the same direction
as the large drill holes on the underside of panels C & D (towards the base).
Ensure all cam locks are tightened fully.
5
#3
#2
#3
#2
#2
#3
B
#2
#3
#2
BASE