Aircon Off SMART REMOTE 설정 지침 및 사용 설명서 - 페이지 4

{카테고리_이름} Aircon Off SMART REMOTE에 대한 설정 지침 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aircon Off SMART REMOTE 8 페이지. Universal ac remote control with power saving
Aircon Off SMART REMOTE에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지)

페이지 인쇄

How to Pair the Smart Remote with your Air Conditioner

The Smart Remote Pairing Code Page at the end of this manual lists most major brands of air

conditioners and the associated Smart Remote Brand Codes. These Smart Remote Codes do

not relate to specific air conditioner model numbers.

If your brand is listed, use the Direct Code Input Method.

If your brand is not listed or if the listed codes are not successful with your AC, then use the

Auto Search function to find the matching code.

This is a link to Smart Remote Pairing information and videos:

https://www.airconoff.com.au/smart-remote-setup

How to Use Direct Code Input Method.

When your AC IS LISTED on the brand code list

1. From the Code Table, select the correct codes for your brand. Start with the first

code, if this does not operate your AC, try the second code and so on.

Note: There are often many possible codes. Each code in the list is separated by a

comma"," or hyphen"-". Commas separate individual codes and hyphens show a range of

codes. For example: 0200-0205 means 0200, 0201, 0202, 0203, 0204, 0205.

2. If necessary unlock the Set Up Function.

3. Press and release the "S" "SELECT" key, the Model Code display will flash on the LCD.

Using the keypad enter the selected 4 digit code. Press each digit in turn. The Smart Remote

accepts the code automatically and the code numbers stop flashing. To test a code use the

Blue Power Button. If it turns the AC "On", try other function keys. If the AC does not turn "On"

or if other functions do not work correctly, then try another code. To input another code then

press and release "S" again and enter the new code. Repeat this until all functions work

correctly. If the keypad becomes non responsive unlock again using the"Time+" key.

How to use Smart Remote Brand Code Auto-Search

(When Listed Codes Don't Work or the Brand is Not Listed)

1. If necessary unlock the Set Up Function.

2. Aim the Smart Remote at your air conditioner.

3. Ensure your air conditioner is on at the mains but not running. Press and hold the "S"

"SELECT" key for 5 seconds and then release. The Smart Remote will go into auto-search

mode and will emit a continuous signal. The code numbers on the LCD display will flash and

then steadily increase. Keep the remote pointing at the AC. (If the code numbers start too

high, use the "TEMP Up & Down" keys to scroll to the code that you want to start the Auto-

Search from.) When the AC receives a signal it recognises it will make a beep and turn on.

Immediately press any key to stop the count on that code. If you don't stop the count in time

you will need to scroll back to the lower code number required.

4. Test the code fully by trying all normal function keys. If they do not work correctly with the

AC you have not found a totally compatible code. Repeat steps 1 and 2 until a completely

correct code is found and the AC operates normally.