Great Little Trading Alba Regular L4468 매뉴얼 - 페이지 8
{카테고리_이름} Great Little Trading Alba Regular L4468에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Alba Regular L4468 10 페이지. Double drawer unit
페이지 인쇄
STEP 8:
Create the drawers.
Attach the L-shaped runners (#7) to the drawer side
panels H (x2) & I (x2) with the flat head screws (#5).
The wheel of the runner should be on the opposite side
of the panel to the groove and should be next to a small
recessed drill hole.
The runners should be the same length as the panels and
the screws should be flat against the runner to ensure
the drawer pulls out smoothly.
#5
#5
#7
#5
I
#5
#5
#7
#5
I
Hardware for Step 8:
12x #5 Flat Head Screws
4x #7
L-Shaped Runners
#5
#7
#5
#5
#7
#5
H
#5
#5
#7
#5
H
STEP 9:
Add the back panel J to the drawer sides.
Line up the grooves on the inside of the drawer and use 2x wooden dowel
(#2) to position the back panel J against the side panel H. Secure in place with
1x screws (#10). The screw should sit inside the recessed holes and should
not protrude.
Repeat on the other side with panel I, again lining up the grooves on the inside
and securing with 1x screw (#10).
Repeat for the second drawer.
I
#10
#10
8
H
#2
#2
J
#2
#2
Hardware for Step 9:
4x #10 30mmL Screws
8x #2 Wooden Dowels
#10