Great Little Trading Alba Regular L4470 조립 설명서 - 페이지 4
{카테고리_이름} Great Little Trading Alba Regular L4470에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Alba Regular L4470 9 페이지. Tall open base unit & top shelf
페이지 인쇄
STEP 1:
Build the Top Shelf first.
Take panel A and position with the large drill holes on the floor. Insert 1x cam
dowel (#1) in the central hole shown using a Phillips screwdriver and push 2x
wooden dowels (#2) in the remaining holes.
Take panel B and push onto the dowels, making sure the large drill holes are
facing outwards. (this will ensure they are not seen once the unit is finished.)
Insert 1x cam lock (#3) into the central hole of Panel B and turn clockwise to
secure.
#2
#1
A
#1
#2
Hardware for Step 1:
Using Cam Locks:
When inserting into the panel, ensure that each cam lock's
2x #2 Wooden Dowels
arrow is pointing towards the drill hole on the side edge
of the panel & the dowel that it will be receiving.
When the panels are in the connected position, using a
screwdriver, turn the cam lock in a clockwise direction to
lock and secure.
1x #1 Cam Dowel
1x #3 Cam Lock
B
#3
IMPORTANT: Make sure that the
#2
small drill holes on the edge of
panel A are next to the connection
to panel B - they will be needed at
a later step.
#3
STEP 2:
Using a Phillips screwdriver, prepare the top shelf side panels by inserting 3x
cam dowels (#1) into the smaller holes of BOTH panels D & C.
#1
#1 #1
D
Hardware for Step 2:
6x #1 Cam Dowels
4
#1
C
#1
#1
#1