Great Little Trading Blake 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Great Little Trading Blake에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Blake 9 페이지. Cube storage - 9 cube unit
STEP 5:
Prepare top panel F by inserting 8x cam dowels
(#4) into the outer holes and insert 8x 20mm
wooden dowels into the inner holes on the panel
as shown.
#1
#1
#4
#4
#4
STEP 6:
You are joining this top panel at the
side of the unit that has the larger drill
holes on panels B, C & 2xE.
Orientate top panel F with the
grooved edge facing up and align all
the hardware with the corresponding
holes on panels B, C & 2xE.
When in place, insert 8x cam locks
(#3) into the large drill holes on the
vertical panels and turn clockwise to
secure.
Hardware for Step 6:
8x #3 Cam Locks
Hardware for Step 5:
8x #1 Wooden Dowels
(20mm)
8x #4 Cam Dowels
#1
#1
#4
#4
#4
#4
F
#4
TOP
F
#3
E
#3
E
B
BASE
STEP 7:
Take base panel A and position with the multi-
drilled side face up as shown.
Attach the 2x side skirting bars (J) to panel A
using 4x 25mm wood screws (#7) in the position
shown. The recessed holes on the bars should be
facing up.
#7
STEP 8:
Attach the 2x long skirting bars K to the base panel A.
Position the bars along the edges of the base using 2x 20mm wooden dowels
(#1) for EACH bar, then fix in place using 4x 25mm wood screws (#7) for
#3
EACH bar. Tighten fully. The recessed holes on the bars should be facing up.
#3
Hardware for Step 8:
4x #1 Wooden Dowels
C
(20mm)
8x #7 Wood Screws (25mm)
6
Hardware for Step 7:
4x #7 Wood Screws (25mm)
#7
J
A
#7
#7
#7
#1
#7
#7
#1
K
#7
J
#7
K
#7
#1
#7
A
#7
#1