Great Little Trading L1420 매뉴얼 - 페이지 5
{카테고리_이름} Great Little Trading L1420에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading L1420 8 페이지. Northcote divider unit
페이지 인쇄B
STEP 3:
Position unit base (B) over the left hand side panel (C) as shown, so
that the recessed grooves on each panel are aligned. Guide the unit
base (B) over the cam dowels and wooden dowels onto the lower edge
of the side panel (C) and into the drill holes on the edge of the panel.
When in position, push down firmly and secure by tightening 2 x cam
locks (#2) by turning clockwise, at the point of connection between the
two panels.
C
left
When in position, turn the 2 x
cam locks (#2) on the unit base
(B) clockwise to lock in place.
B
STEP 4:
Position the unit top (A) over the shaped top edge of the side
panel (C) as shown, and so the recessed groove lines up on
both panels. Guide the unit top (A) over the cam dowels and
wooden dowels, into the drill holes on the edge of the panel.
When in position, push down firmly and secure by tightening
the 2 x cam locks (#2) on unit top (A).
5
A
C
left
When in position, turn the 2 x
cam locks (#2) on the unit top
(A) clockwise to lock in place.