Great Little Trading L2985 Northcote 매뉴얼 - 페이지 8
{카테고리_이름} Great Little Trading L2985 Northcote에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading L2985 Northcote 13 페이지. Tall open base & shelf unit
페이지 인쇄Assembly: Open Base Unit
A
left
STEP 9:
Take top panel (B), with its hardware facing down, and position it so that the drillholes
on its far-side edge are guided over the cam dowels and wooden dowels on side panel
(A).
At the same time, the hardware on the underside of top panel (B) need to be inserted
into the drillholes on the top edge of divider panel (H). This will require you to tilt top
panel (B) slightly to get the three panels to join.
Once top panel (B) is in position, secure by tightening 4x cam locks (#2) by turning
clockwise. These cam locks are at the back of divider panel (H) and the underside of
top panel (B).
B
H
STEP 10:
Once top panel (B) is in position, secure by tightening 4x cam locks (#2) by turning
clockwise. These cam locks are at the back of divider panel (H) and the underside of
top panel (B).
8
When panel is in position,
secure by turning the two
bottom cam locks (#2)
clockwise.
B
H