Hi-Link HLK-RM04 사용자 설명서 - 페이지 11

{카테고리_이름} Hi-Link HLK-RM04에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Link HLK-RM04 18 페이지. Serial to ehthernet
Hi-Link HLK-RM04에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지), 애플리케이션 매뉴얼 (12 페이지)

페이지 인쇄
Hi-Link HLK-RM04 사용자 설명서
Tes
Trst
8

Firmware upgrade

1. Restore the factory value.
2. Pc can connect with module through Ethernet, ip: 192.168.16.123/255.255.255.0. Browser
visits 192.168.16.254. Username / password: admin / admin.
3. Open the following page. Select the appropriate firmware, click apply upgrades. Wait a
3 minutes. Can not cut out the upgrade process, otherwise it may cause damage to the module.
9

Typical application network settings

This secti
on will give some simple examples to use the different functions of a typical
configuration.

9.1 Serial to Ethernet

1. Restore factory value setting.
2. Pc can connect with module through Ethernet, ip: 192.168.1
visits 192.168.16.254. Username / password: admin / admin.
3. Open the following page, click on the R
as below. Clicks APPLY to take effect.
100ms
5s
6.123/255.255.255.0. Browser
ADIO OFF button to turn off wifi function, shown
bout