Great Little Trading L4464 매뉴얼 - 페이지 6
{카테고리_이름} Great Little Trading L4464에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading L4464 9 페이지.
페이지 인쇄
Grooved edges on panels to line up
TOP
E
#2
#3
G
#2
#3
#2
STEP 6:
Lay side panel G down and insert 4x wooden dowels (#2) into the holes in the four
corners of the panel.
Take base panel F (with the 2 ledges) and position under the runner. The ledges/
holes are to face outwards and the grooved edge is to line up with groove on the
side panel G.
Insert 2x cam locks (#3) and turn lock to secure the panels.
Then take top panel E and position on the long shaped edge of side panel G. Ensure
the large drill holes are facing inside the unit and the grooved edge is lining up with
the groove on panel G.
Insert 2x cam locks (#3) and lock to secure the panels.
Hardware for Step 6:
4x #2 Wooden Dowels
4x #3 Cam Locks
#2
#3
F
#3
#2
BASE
#3
Hardware for Step 7:
4x #2 Wooden Dowels
4x #3 Cam Locks
TOP
#2
#3
E
G
FRONT
STEP 7:
Insert 4x wooden dowels (#2) into the outer drill holes on the edges of
panels E & F.
Then take side panel H and position it as shown on top of the part assembled
unit, ensuring the grooved edge is lining up with the grooves on the other
panels.
Insert 4x cam locks (#3) into the remaining holes and lock to secure in place.
6
#2
H
#2
#2
#3
#3
#2
BACK
#3
F
BASE