Great Little Trading L4491 조립 설명서 - 페이지 6

{카테고리_이름} Great Little Trading L4491에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading L4491 10 페이지. Atlas desk

STEP 3:

With the help of a second person, stand up LH side panel (B) and slot upper cross

bar (E ) to the cam dowels at the top and affix with x2 cam locks (#2) from the inside.

Next slot lower cross bar (F) to the bottom of panel (B) using x1 wooden dowel (#3)

and insert x1 barrel nut (#5) on the back facing side of panel (F) and secure with x1

bolt (#4) through panel (B) using the allen key.

Next insert x1 wooden dowel (#3) to the lower cross rail (F) and slot central diver

panel C to the cross rail panels. Secure upper cross rail panel (E) with x2 cam locks

(#2) and insert x1 barrel nut (#5) to panel (F) and secure with x1 bolt (#4) using the

allen key.

Hardware for Step 3:

4x #2 Cam Locks

2x #3 Wooden Dowels

2x #4 Bolts 85mmL

2x #5 Barrel Nuts

STEP 4:

Carefully lower the desk so that the back of the desk to the floor. Insert x6 cam

dowels (#1) to the bottom of panels C and D. Slot in panel I to panel C ensuring the

cut out corner is on the front facing side and the grooved side is at the back, then

connect with side panel D. Secure the cam dowels by inserting x6 cam locks (#2) to

the hardware holes on the underside of panel I and turn clockwise.

Hardware for Step 4:

6x #1 Cam Dowels

6x #2 Cam Locks