Great Little Trading L5124 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Great Little Trading L5124에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading L5124 7 페이지. Blake cube storage - bench
페이지 인쇄
STEP 8:
Return to the bench frame and insert 8x
barrel nuts (#7) into the holes on the sides of
panels A, B & both Es. Ensure the hole in the
barrel nut is facing the edge of the panels.
With the grooved edge of the base panel F on
the floor, position the panel onto the bench
frame using the wooden dowels. When in
place, insert 8x cross-head bolts (#6) through
the base and into the barrel nuts. Fully tighten
all bolts.
B
#7
#6
F
#6
#6
#6
#6
#6
Hardware for Step 8:
8x #6 Cross-Head Bolts (47mm)
8x #7 Barrel Nuts
E
E
#7
#7
#7
#7
#6
#6
STEP 9:
Attach the feet.
Use 1x 25mm wooden dowel (#9) to position
1x foot (K) on any corner of the base, then
insert 1x hex bolt (#8) through the base panel
to secure.
Fully tighten using the allen key (#12) supplied.
Repeat on remaining 3 feet.
STEP 10:
A
Carefully stand the unit onto its feet and insert
back panel J into the grooved edges and secure
using 12x back panels screws (#10).
Note the lower edge of the back panel has the
notches on both sides.
#10
#10
#10
#10
6
Hardware for Step 9:
4x #8 Hex Bolts (42mm)
4x #9 Wooden Dowels (25mm)
#8
#9
K
K
#9
Hardware for Step 10:
12x #10 Back Panel Screws
#10
#10
#10
J
#10
#10
#10
#10
#10
#8
#9
K
#9
K