AgriEid Cattle Scales 설치 매뉴얼 - 페이지 2

{카테고리_이름} AgriEid Cattle Scales에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AgriEid Cattle Scales 6 페이지.

Step 1 : Build a sturdy platform out of hard wood (45-50mm thick) or

metal to hold the estimated max weight of the livestock being weighed.

Step 2 : Turn the platform upside down and use the spacers provided

to drill 2 x holes at each corner of the platform. Space these holes and

the load cells about 200-300mm from each edge of the platform.

If using steel or aluminum – drill or weld on the (4) mounting brackets

provided and (8) bolts with washers.

DO NOT WELD THE BRACKETS WITH THE LOAD CELLS

ATTACHED as they will be destroyed by heat damage

If using a hardwood timber platform – purchase (8) coach bolts (12 x

90-100mm) to secure the load cells to your platform.

Step 3 : The load cells are then bolted onto the platform with the

provided spacers. Ensure the spacers are fitted between the platform

and the top of the load cell to give the load cells plenty of room to take

an accurate reading.