Great Little Trading Paddington Bunkbed L5481 어셈블리 - 페이지 5

{카테고리_이름} Great Little Trading Paddington Bunkbed L5481에 대한 어셈블리을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Paddington Bunkbed L5481 9 페이지.

This bed is heavy and is best built in the room that it is intended for.

Please ensure you are building on a protective surface such as a carpet or rug

to ensure the panels are not damaged during the build.

STEP 1:

Take the 2x headboards (F), 2x headboard rails (E), 2x Front Guard Rails (I),

2x RH leg front panels (C), 2x LH leg front panels (D), 1x front side rail (G),

1x back side rail (J) and rear guard rail (H) and insert the wooden dowels (#1)

into the edges of the panels, as shown.

Lightly tap the dowels with a hammer for this step.

Hardware for Step 1:

44x #1 Wooden Dowels 30mm

STEP 2: Build the leg structures.

Start by securing one of the RH leg side panels (A) to one of the RH leg

front panels (C) using 3x 50mm bolts (#2) in the positions shown.

Tighten fully with the Allen key.

Repeat for the second RH leg.

Now secure one of the LH leg side panels (B) to one of the LH leg front

panels (D) using 3x 50mm bolts (#2). Tighten fully with the Allen key

Repeat for the second LH leg.

Hardware for Step 2:

12x #2 Bolts (50mm)