Great Little Trading Paddington L5479 매뉴얼 - 페이지 6

{카테고리_이름} Great Little Trading Paddington L5479에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Paddington L5479 9 페이지. Bunkbed

STEP 3: It is suggested this step is completed on the floor.

Assemble the bed end.

Place the prepared headboard and rail panels (G, E, F, E) in the positions

shown with one set of LH & RH legs on each side.

Start with the LH leg side and use the dowels to locate all panels into LH

assembled leg as shown. Fasten in place with 2x connecting screws 50mm

(#8), then add 2x cover caps (#9). Now locate the RH assembled leg to the

other end of the panels using the dowels and fix in place with 2x connecting

screws 50mm (#8), then add 2x cover caps (#9).

Repeat this step for the second bed end.

Hardware for Step 3:

8x #8 Connecting screws 50mm

8x #9 Cover Caps 2,3x12mm

STEP 4: It is suggested this step is completed on the floor.

Secure the upper headboard (G) & 2x headboard rails (E) with 8x screws 25mm

(#13) in the positions shown.

4x flat cover caps (#14) can be added to cover the visible hardware on panel G

if required.

Repeat this step for the second bed end.

#13

#14

#13

Hardware for Step 4:

16x #13 Screws 25mm

8x #14 Flat Cover Caps 13mm

#14

#13