Great Little Trading Star Bright 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Great Little Trading Star Bright에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Star Bright 7 페이지. Single bed
Great Little Trading Star Bright에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)
페이지 인쇄
STEP 1:
Insert 1x wooden dowel (#1) into the side rail A.
Locate the side rail A onto the footboard B with the slat support
rail facing inwards and insert 2x barrel nuts (#2) into the side rail
and secure with 2x bolts (#3).
Tighten with the allen key provided.
#3
#3
B
#3
#3
FR - REMARQUE : Assurez-vous que les rails latéraux sont dans le bon sens. Le rail de support des
lattes doit se trouver dans la moitié inférieure du panneau latéral, de sorte qu'il y ait une plus grande
section au-dessus du rail qu'il n'y en a sous le rail.
DE - HINWEIS: Stellen Sie sicher, dass die Seitenschienen richtig herum nach oben zeigen. Die Lat-
tenhalteschiene sollte sich in der unteren Hälfte der Seitenwand befinden, sodass über der Schiene ein
größerer Abschnitt vorhanden ist als unter der Schiene.
ES - NOTA: Asegúrese de que los rieles laterales estén en la posición correcta hacia arriba. El riel de
soporte de las lamas debe estar en la mitad inferior del panel lateral, de modo que haya una sección
más grande sobre el riel que debajo del riel.
Hardware for Step 1:
1x #1 Wooden Dowels
2x #2 Barrel Nuts
#2
2x #3 Bolts
#1
#2
#2
#1
GB - NOTE: Ensure the side rails are attached
#2
the correct way up. The slat support rail
should be in the lower part of the side rail,
so there should be a larger gap above the slat
support rail than underneath it.
STEP 2:
Insert 1x wooden dowel (#1) into the second side rail A.
Locate the side rail A onto the footboard B and insert 2x barrel nuts (#2) into the
side rail and secure with 2x bolts (#3).
Tighten with the allen key provided.
A
#3
#3
5
#2
#1
#2
#2
#1
#2
B
A
Hardware for Step 2:
1x #1 Wooden Dowels
2x #2 Barrel Nuts
2x #3 Bolts