Great Little Trading Fish & Chip Shop L4700 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Great Little Trading Fish & Chip Shop L4700에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Fish & Chip Shop L4700 7 페이지.
페이지 인쇄Hardware for Step 5:
1x #2 Barrel Nuts
1x #3 Bolts
#3
STEP 5:
Attach back panel (B) to side panel (A) using 1x barrel nut and bolt. Please
note this panel B does not have a striped print on the front. You will need
this panel for step 8.
Please check the base panel is
Hardware for Step 6:
secured the so that the two holes
on the top surface are nearest the
front edge. You will need this for
step 7.
2x #2 Barrel Nuts
2x #3 Bolts
#3
#3
STEP 6:
Attach base panel (C) to side panel (A) using 2 x barrel nuts and bolts.
Please do not fully tighten the barrel nut bolts, they need to be loosely
tightened to complete step 7.
hole should be near to top face
when assembled correctly
B
A
#2
#2
C
A
#2
STEP 7:
Place assembled panels E & D onto assembled panels A & C to form middle
section. Please slot dowels in whilst placing the assembly into position.
Please also fully tighten the the barrel nut bolts from step 6.
A
STEP 8:
Attach front panel (K) to side panel (A) using 1x
barrel nut and bolt.
hole should be near to top face
when assembled correctly
K
6
E
D
C
Hardware for Step 5:
1x #2 Barrel Nuts
1x #3 Bolts
A
#2
#3