Gaggenau AH 590-720 작동 및 조립 설명서 - 페이지 8

{카테고리_이름} Gaggenau AH 590-720에 대한 작동 및 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau AH 590-720 10 페이지. Freely suspended insular hood
Gaggenau AH 590-720에 대해서도 마찬가지입니다: 작동 및 조립 지침 매뉴얼 (10 페이지)

페이지 인쇄

Fig. 21

Fig. 22

All manuals and user guides at all-guides.com

6. Adjust the support frame to the desired height

and secure with 8 screws. The length of the

support frame can be adjusted in steps of

´ ´ / 20 mm from 15

´ ´ / 646 mm (Fig. 21).

Note:

ensure that the minimum distance between the

hob and the extractor hood is maintained –

24 ´ ´ / 600 mm for an electric hob and 30 ´ ´ / 762 mm

for a gas hob

7. Stainless steel ventilation ducts only

(LK 590-010/020/030):

pull the protective film off the metal surface.

8. Place both ventilation ducts over the support

frame. Take care not to scratch the sensitive

duct surface.

9. Attach the electrical plug to the support frame

with sticky tape so that it can be easily reached

later.

10. Hang the hood and the support frame with the

two key-holes to the two screws in the ceiling

(Fig. 22).

Attention: the two screws cannot support

the weight of the hood. Therefore it must be

supported at this stage!

´ ´ / 386 mm to