Great Little Trading L5355 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Great Little Trading L5355에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading L5355 16 페이지. Star bright chest of drawers

Hardware for Step 2:

2x #5 Wooden Dowels

2x #6 Screws 25mm

TOP

Note:

Note the wheel is

positioned towards

the floor when

attached.

STEP 2: NOTE: You are building this unit with the BACK facing UP.

Align horizontal divider panel (B) so that the countersunk holes in the middle are

facing outwards and the 2x small pilot holes on the long thin edge are facing up.

Insert 2x wooden dowels (#5) into panel (A) and slot into panel (B) ensuring that the

wheel of the runners are facing the floor and runner (#1) is on the left hand side as

shown. Secure with 2x screws (#6).

The small drill holes on the

edge of Panel B to be facing up.

BASE

#12

TOP

#12

Use the smaller holes

when attaching the

runner. Start with the

first small

next to the wheel.

STEP 3: Locate LH side panel (C ) and attach 3x flat runner (#1) with 3x screws

(#12) per runner. Once complete, insert 3x cam dowels (#7) where indicated.

When fixed in the correct position, there will be a gap between the front edge of the

panel and the start of the runner. If the front of runner is level with the edge of the

panel, it is in the wrong position.

Hardware for Step 3:

3x #1 Flat Runners

9x #12 Screws 12mm

3x #7 Cam Dowels

#12

BASE