HI-PRESS TANGYE HYDRALITE PS1230 작동 및 안전 지침 매뉴얼 - 페이지 4

{카테고리_이름} HI-PRESS TANGYE HYDRALITE PS1230에 대한 작동 및 안전 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HI-PRESS TANGYE HYDRALITE PS1230 10 페이지.

HYDRAMITE

Fig. 1

Function

(read in conjunction with Fig. 1)

The permissible working load and the travel of the hydraulic jack are marked on the equipment.

The jack (1) has an in -built hydraulic pump, which is worked by means of an operating lever (2),

under the control of the o perator. The jack ram (3) is raised on each downward stroke of the

lever. For lifting, the lever is placed fully into the operating socket (4).

For lowering, the lever is removed from the socket and placed into the release screw (5).

Turning this anti -clockwise will allow the ram to descend. The amount this is rotated will

control the speed of descent; only open a very small amount (approx. 5°) at first.

Close the release valve after use, to ready the jack for the next operation.

Operating Positions

The hydraulic system is sealed – the jack may be used in any mounting position.

Oil Level Check

Lay the jack on its side with the filler plug uppermost and remove the filler plug. There should

be no airspace under the plug.

If oil needs to be added ens ure that the surrounding area is clean and fill to the bottom of the

plug threads. Use high quality hydraulic oil such as Shell Tellus ISO 32 or equivalent.