HI-PRESS TANGYE HYDRALITE PS630 작동 및 안전 지침 매뉴얼 - 페이지 2

{카테고리_이름} HI-PRESS TANGYE HYDRALITE PS630에 대한 작동 및 안전 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HI-PRESS TANGYE HYDRALITE PS630 10 페이지.

Operating & Safety Instructions

Please read this instruction booklet carefully before operating the product and keep in a safe

place for future reference.

It is the responsibility of the purchaser to ensure that operators are properly trained in the safe

use of this equipment and have access to

No modification and/or additions may be made to this equipment without

permission of the manufacturer.

It is expected that the product is used by competent technical personnel who have been

properly trained to use hydraulic lifting equipment

Hydramite & Hydralite

Description

This equipment is provided for the purpose of lifting or lowering loads, or exerting a force,

under the control of a trained operator.

The equipment is supplied completely assembled and ready for use. No service adjustments are

necessary or possible duri ng operation.

An internal safety relief valve (factory set) is fitted which limits the load that may be lifted to the

equipment rated load + 10% maximum.

Before Each Use

Ensure that the jack is in good condition.

Check the external surfaces for absence of mechanical damage and/or oil leaks. If either is

present do not use the equipment and have it serviced.

Ensure that the external surfaces are dirt free.

Check the oil level.

Operating Instructions

Place the jack on a firm level foundation fu lly supporting the jack base, and if necessary place

suitable material between the load point and jack ram to avoid damaging the structure to be

lifted.

Use the jack by operating the lever in a steady controlled movement at a maximum of 30 strokes

per min ute.

Remove the operating lever when not in use.

Tangye Operating and Safety

I nstruction

the written