Great Little Trading L4890 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Great Little Trading L4890에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading L4890 2 페이지. Table lamp
페이지 인쇄Thank you for shopping with GLTC, we hope you enjoy having this product
in your home.
Customer Service:
If you nd that any components are missing or damaged, do not use the
item. Please contact GLTC Customer Services on 0344 848 6000
immediately.
Product Care:
•
We recommend cleaning with a soft dry cloth.
•
Do NOT use abrasive cloths as these will damage the nish.
•
Do NOT use cleaning products which contain ammonia, solvents
or abrasive materials.
•
Do NOT expose the item to extremes of heat and humidity.
Safety Warnings:
•
WARNING! Not suitable for children under 3 years due to the ex
being a long cord and posing a strangulation hazard.
•
Not suitable for children under 3 years old due to small parts which
may become detached and pose a choking hazard.
•
We recommend the ex is secured out of reach of young children
and pets to limit the risk of entanglement or strangulation.
•
Please inspect the product for any faults, broken or missing parts
and remove the product from use immediately if any are found.
•
The LED bulb is not replaceable on this product.
•
Please retain these instructions for future reference.
•
This product is for indoor use only.
Parts List
A
B
Instructions for use:
•
Carefully unpack the box, make sure all parts are present before
assembly.
•
Remove the components from all of their packaging, taking care
not to damage or misplace any components.
•
Before assembling your product ensure you have inspected the
components for any faults, broken or missing parts.
•
Your table lamp has been packaged with the shade upside down
for safe transit. Unscrew the shade ring (D) from the LED module
in the base (A), to release the shade from the base.
•
Rotate the shade the correct way up and re-attached the shade
(B) onto the LED module in the base (A), ensure the shade ring
(D) is securely screwed down to ensure the shade is safely
attached.
•
Make sure the cable is completely unravelled and that there are no
snags in the cable (C).
•
Plug the end of the cable (C), into the lamp base (A), through the
white cable exit hole in the bottom of the base.
2
C
D