Gaggenau AI480180 사용 설명서 - 페이지 11

{카테고리_이름} Gaggenau AI480180에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau AI480180 16 페이지. Island ventilation hood

Cleaning and care

The grease filter saturation display F flashes after

an operating time of 30 hours to you indicate to you

that you should clean the grease filter. The grease

filters can of course be cleaned at any time, even if

the grease filter saturation display has not started

to flash.

The stainless steel grease filters can be

removed easily for cleaning:

Disconnect the power supply (switch off the

fuse).

Grip the grease filter handle and push the slide

towards the rear. Then pull the grease filter

downwards out of the holder; repeat the

operation for the other grease filters.

You can clean the stainless steel grease filters

in a dishwasher at a maximum temperature of

65°C, where it should be supported vertically

to allow food or rinsing residues to drain off.

If possible, the inner parts of the housing should be

wiped out in hot rinsing water when replacing the

filters.

Caution:

when cleaning the inside of the housing, beware of

protruding parts..

After having cleaned them, re-insert the grease

filters in the extractor hood in reverse order.

Important:

the handles of both grease filters must be visible

after assembly.

Press the F key to set the elapsed hours counter to

zero. Flashing of the indicating lamp goes off.