70mai A800S 사용자 설명서 - 페이지 4

{카테고리_이름} 70mai A800S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 70mai A800S 6 페이지. 4k dashcam & rear car camera set

Insert the memory card into the card slot with its contacts facing up until you

hear a click. Attach the mount into the slot and slide up, as shown in the figure

below. You will hear a snap when it is in place. Make sure the mount is securely

installed on the dashcam.

To mount the dashcam, peel off the protective film from the adhesive sticker

on the base of the mount, and put the dashcam onto the electrostatic sticker in the

dotted area. As shown in the figure below, run the power cord along the top of the

windshield, down the A-pillar, and around the glove compartment, so that the power

connector is near the cigarette lighter. Connect the power cord to the car charger,

then plug the charger into the cigarette lighter socket.

Turn on the dashcam and adjust the camera angle to ensure that the camera

is facing the front of the vehicle. To turn on the camera, press the Power button. To

turn it off, press and hold the Power button for 3 seconds, and to force shut it down,

press and hold the Power button for 15 seconds.