Great Northern Popcorn 4oz Kettle Foundation 사용 설명서 - 페이지 6

{카테고리_이름} Great Northern Popcorn 4oz Kettle Foundation에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Northern Popcorn 4oz Kettle Foundation 6 페이지.

LESSON ONE:
HOW TO MAKE
GREAT POPCORN
Warmer
1. We recommend using the Great Northern
Popcorn Co. Gourmet pre-measured portion
packs for PERFECT POPCORN EVERY TIME!
No need to preheat the kettle, just cut off the top
of portion pack and empty the contents into the
kettle. (Note: Run warm water over the portion
pack for a few minutes to loosen the oil
portion.) If using other suitable ingredients, have
pre-measured portions ready in advance.
best results use 1/4 cup oil per 1/2 or 3/4 cup
kernels, or 1/3 cup oil for 1 full cup of kernels.
2. Close lid and door.
3. Switch the Stirrer to ON so that it starts stirring.
Switch the kettle heater to ON. You will hear the
sizzle in just a few minutes.
4. Switch the warming tray and spot light to ON.
5. Popcorn starts popping out through the lid after
about 3 to 4 minutes.
6. When popping action stops (no more popping
LESSON TWO: CLEANING
IT'S EASY!
CALL THE KETTLE CLEANING CREW
When the shows over and everyone's left the theater
it's time for GNP's "Kettle Cleaning Crew" to go to
work. Our specially formulated cleaner will dissolve
built-up, burnt-on, grimy gooey cooking oils used to
pop kettle corn. Keeps your popper looking good for
years.
Unplug the popper
from the electrical
source. Closely follow
the directions on the
"Kettle Cleaning Crew"
label for best results.
Thoroughly rinse and
wipe clean. For heavy
burned kettles repeat
p r o c e s s . F o r l i g h t
regular cleaning use
CAUTION: Pot, oil and popcorn
are extremely hot. Escaping
steam can cause severe
scalding. Children are
naturally attracted to the
excitement of the popping
event. Keep children well back
out of harm's way.
Stirrer
Pot Heater
sound from the pot), switch the Stirrer and Pot
Heater to the OFF position. Popping is complete.
Rotate the handle bar on the pot and pour out all
remaining popcorn. Gently shake if necessary.
7. Pot Heater switch must remain OFF if the unit is
not popping. Only the spot light and warming
deck should be left ON, this will keep the
popcorn warm, dry and tasty for a longer period
For
of time.
8. Serve popcorn with the scoop provided.
Note: Do not add butter or other liquid flavoring
in main unit popcorn bin. Avoid a big mess!
Remove popcorn to a suitable serving bowl or
popcorn container before adding this type of
flavoring.
9. Always remove plug from power supply before
cleaning and if the unit is not being used for a
period time.
dish soap. Only use mild synthetic scouring pads. Do
Not submerge pot in liquid.
To minimize burning use only GNP Movie Theater
Popping Oil. To order GNP products, go to:
www.greatnorthernpopcorn.com.
Clean glass with mild glass cleaner solution. Check
label to make sure the product used is compatible
with food preparation equipment.
Vacuum out small debris left on the warming deck.
Empty the "Old Maids" tray. Wipe deck and tray
with a sponge dipped in dish soap. Rinse sponge in
clean water throughly. Sponge wipe until clean.
Avoid attracting pesky varmints. Do Not leave food
particles in your popper.
Page 9
WARRANTY AND RETURN POLICY
Five Year Limited Warranty Great Northern
Popcorn Company (GNP) popcorn machines are
warranted to be free from defects in materials and
workmanship for five years from the date of
purchase. Within this period, Great Northern
Popcorn Company will, at its sole discretion, repair
or replace any components that fail during normal
use. GNP popcorn machines are intended for
residential and personal use only. This warranty
does not apply to damage caused by abnormal or
unreasonable use, including any repair or
attempted repair by anyone other than a certified
Great Northern Popcorn Company authorized
service technician. Use of replacement parts that
are not OEM parts, that cause incidental or
consequential damages will void the warranty.
Using this product for anything other than its
original intended purpose or altering this product in
any way will void this warranty.
If your GNP popcorn machines has a
manufacturers defect covered by our warranty, we
will either repair or replace it, at our option, without
charge or refund. Such repairs, or items deemed to
be eligible for replacement, will be made at no
charge to the customer for parts or labor, provided
that the customer shall be responsible for all
shipping costs.
Beyond the initial 30 day period, this warranty does
not apply to: A. cosmetic damage, such as broken
glass, scratches, nicks and dents; B. consumable

CUSTOMER SERVICE

Customer service and product support are available on line at www.greatnorthernpopcorn.com.
© 2017 Great Northern Popcorn Co. All rights reserved.
parts, such as light bulbs, unless product damage
has occurred due to a defect in materials or
workmanship; C. damage caused by accident,
abuse, misuse, water, flood, fire, or other acts of
nature or external causes; D. damage caused by
service performed by anyone who is not an
authorized service provider of Great Northern
Popcorn Company; or E. damage to a product that
has been modified or altered without the written
permission of Great Northern Popcorn Company. In
addition, the original purchaser must provide
proper proof of the original retail purchase and all
other requested information to Great Northern
Popcorn Company.
Please note that repair costs and handling charges
may apply if any issue was found to be the fault of
the end user. Please be prepared to provide the
units serial number, if applicable, your return
shipping address and a daytime phone number you
can be reached at and proof of purchase.
Great Northern Popcorn Company retains the
exclusive right to repair or replace with a new or
newly-refurbished replacement machine or part.
Replacement of product or offer of a full refund of
the purchase price is at the sole discretion of Great
Northern Popcorn Company. Such remedy shall be
the sole and exclusive remedy for any breach of
warranty. Do not return merchandise to Great
Northern Popcorn without proper documentation.
(RMA)
TM
Page 10