Great Northern Popcorn 6oz Kettle Foundation 사용 설명서 - 페이지 4

{카테고리_이름} Great Northern Popcorn 6oz Kettle Foundation에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Northern Popcorn 6oz Kettle Foundation 6 페이지.

ASSEMBLY PROCEDURE

1. Use (2) 9/16"x 1-3/8"bolts (Package B) provided to connect the long stand (A) and the 2 square

poles (B) together.

2. Connect the assembly above (step 1) with the short stand (C) by using (2) 9/16"x 1-3/8"bolts

(Package B).

3. Add a cap nut and washer (Package C) to one end of the axle (D). Insert axle (D) through one

wheel (E) and into short stand axle hole (C). Place the second wheel (E) on the opposite end of

axle (D). Next place cap nut and washer (Package C) onto the exposed end of the axle (D).

Tighten cap nut with wrench provided (P). Check cap nut tightness periodically during routine

maintenance.

Package B

Package C

4. Install the handrail (G) onto the right hand side of the storage unit (F) and the working platform

(H) on the left hand side with the nuts, bolts and washers included (Package A).

Package B

Page 5

6. Place the main popper unit (I) onto the

topside of the storage cabinet (F).

Align the power cord located on the

right side of the popper unit with the

u-shape cut out on the right side of

the cabinet. Use the four spring

loaded latches to secure the popping

unit to the storage cabinet.

Caution: Do not attempt to move your

popper without securing the latches.

The popping unit will topple off

causing property and/or personal

damage.

5. Turn the storage cabinet (F) up side

down for convenient assembly. Insert

both ends of the short and long

stands onto the bottom of cabinet

(wheels opposite of the handle

attachment) and attach with bolts

(Package B). Use wrench provide to

throughly tighten bolts.Turn the

completed unit back to up-right

position.

Note: This task should be performed on

carpet or a section of cardboard to

avoid scraping the cabinet or

damaging your floor. This is a two

person task.

Page 6