Hi-Shock C+D3PG 사용자 설명서

{카테고리_이름} Hi-Shock C+D3PG에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Shock C+D3PG 2 페이지. Dlp-link 3d active glasses

페이지 인쇄

REV 0.1

DLP-Link 3D Active Glasses

User's Guide

Model：C+D3PG

3D Active Glasses For DLP 3D Projectors and TVS

Product Features

Earpieces

LCD Lenses

DLP-Link Window

Charge the 3D glasses: Please charge your 3D glasses

the USB port of your computer or the 3D glasses charger ( sold separately) with supplied

USB charging cable when they give low battery warning . Red LED indicator will keep

lighting on until the charging is finished. A full charge may take 4 hours.

Operation Guide

Viewing 3D Contents with the DLP-Link 3D Active Glasses:

1. Turn on both your DLP 3D Ready projector and your 3D content source (such as a 3D

Blu-ray player).

2. Set your DLP 3D Ready projector in "DLP 3D" BEFORE you turn on your content

source like a 3D Blu-ray player. The Blu-ray player communicates with the projectors

to determine whether or not the projector is capable of playing 3D content. If this

communication occurs before you set the projector to 3D mode, the player will think

that the projector is not capable of displaying a 3D image and will only play the video

in 2D format. If this happens, turn the 3D Blu-ray player off, set the projector to 3D mode,

and then turn the 3D Blu-ray player back on so the communication between the two can

connect correctly.

3. Turn on your 3D content source. You can now press and release the Power ON/OFF

button to turnon your DLP-Link 3D Glasses and start watching 3D content.

* The LED indicator will light on for 1.5s to indicate the glasses are turned on, If the

battery is low , the LED idicator will blink once per second , please charge your 3D

glasses if this happened.

Power Button

LED Indicator

by connecting the 3D glasses to

Product Overview

This DLP-Link 3D active glasses are designed to be used with all 3D DLP projectors

3D TVs . The DLP-Link 3D glasses ,equiped with high transmittance and high contrast ratio

liquid crystal lenses, offer the brightest 3D visual experience.

Package Contents

1. DLP-Link 3D Active

Glass x1

2. Cleaning Cloth x1

3. User's Guide x1

4. USB charging cable x1

5. Interchangeable Nosepiece x3

Specification

Shutters

LCD

Refreshing rate

96/100/120/144HZ

Working current

2.8mA

Power supply

Rechargeable battery

Battery life

24 hours continuously

working

Working

temperature

Working Condition

Storage temperature

* Important Notice:

For a better performance of the battery, please follow the guide below when using:

1) continuously using the glasses until the LED give low battery warning blinking for the first

time using, and then full charge the 3D glasses for at lest 12 hours;

2) If the glasses not being used, please fully charged the glasses at least one time within

each 3 months.

4. Turn off your 3D glasses by pressing and holding the power button for about 1.5s after

finish your 3D viewing.

* The LED indicator will blink 3 times to indicate the glasses are turned off. when the

sycn signal is blocked or the projector is exited "DLP 3D" mode, the glasses will turn off

after 5min standby and will "wake up" if the signal is the sync signal is received within

this period.

Maintain the 3D Active Glasses:

Clean the 3D active glasses with a clean and lint-free cotton cloth or with specified

disposable lenses cleaning tissue.

Use Tips

The 3D glasses will activate their Auto OFF and Auto run intelligently in the following conditions.

1. The 3D glasses are standby (for a period of 5 minutes) when powered on, and they will

turn into working mode once received the 3D sync signal during standby mode, otherwise,

the glasses will automatically turn off with the green LED indicator blinking three times.

2. If the 3D glasses become disconnected with the SYNC signal because of : 1>

incorrectdistance and or angle, 2> input source changed, 3> switched to 2D mode, they

will automatically work for a period of 5 seconds. The glasses will resume working once a

3D sync signal is received, otherwise, the glasses will enter into standby mode(for 5 minutes).

Troubleshooting

Q1: What can I do if there is no 3D effect after I have put on and turned on the glasses？

Try this:

1. Please check if the projector/TV setup is in DLP 3D mode or not.

2. Check the battery volume of your glasses, please change it if low in power

3. Make sure you are watching in 3D sync signal covered area .

Q2: Why do the lenses blink when watching 3D films？

Try this:

1. Please change the battery immediately if the battery is seriously low.

2. Interference such as magnetic fluorescent lamps 50 or 60Hz may cause flickers,

please turn off interference source if this occurs.

and

Weight

39g

Transmittance

38+/-2%

Contrast riato

1200:1

Sync operation

DLP-Link

Using range

approximately

0-40℃

℃

-5 -50℃