Cefndy SX158/15/PU 사용자 지침 - 페이지 2

{카테고리_이름} Cefndy SX158/15/PU에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cefndy SX158/15/PU 4 페이지. Perching stool

페이지 인쇄

2. Contents

 Perching Stool

 User Instructions (this leaflet)

 Batch label – This will be found on the product and will include the product code as well as

a number. In the event of needing to contact the manufacturer about this product always

quote the Batch Number.

3. Assembly Instructions

 Carefully unpack and examine the product to ensure it is complete.

 Before use check for any signs of damage e.g. cracked weld, flaking of paint, bent tube. If

any signs occur please contact your supplier to exchange and refrain from using the

product.

 DO NOT ATTEMPT TO USE IF PRODUCT IS DAMAGED.

4. Correct Use –

 To adjust the Perching Stool height

1. Remove the pin clip from the leg individually

2. Select the height by positioning each extension leg

individually aligning the holes in the extension leg and

frame

3. When the required height is selected refit the pin clip

into the appropriate hole

4. Repeat the above on the other three legs

5. Ensuring all four pin clips are fully engaged and check

that all four legs are set to the same height

6. This product is designed so the seat will be lower at the front than the rear (see

warning section)

 To adjust the removable back (DB versions only)

1. Unscrew the handle wheels (clockwise) around half

one full turn

2. The detachable back should now slide freely in the

locating brackets

3. Once the desired position is reached retighten (anti-

clockwise) the four handle wheels to lock the back in

position

4. As an added safety feature pin clips are inserted

between the hanging brackets to stop the back from sliding out of the brackets

ensure these pin clips are always inserted when the product in in use

The back may have been located in an inverted position for transit. If so remove the two safety pin

clips located on the back between the hanging brackets, slightly unscrew the hand wheels as

above, fully withdraw the back from the brackets. Then rotate the back to an upright position and

sliding the back into all four brackets, insert the safety pin clips & repeat the adjustment process

to locate and secure in the back in correct position.

Ref: 2015 Percher Range October 2015

Issue1

Form No: Cef 0035

User Instruction for the 2015

Mediatric/Bariatric & Super

Bariatric Perching Stool Range