Great Northern Popcorn 6265 조립 및 사용 지침 - 페이지 3

{카테고리_이름} Great Northern Popcorn 6265에 대한 조립 및 사용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Northern Popcorn 6265 4 페이지. Old fashioned gumball machine, 6260 gumball machine with stand, 6265 15 inch gumball machine, 6270 11 inch gumball machine

페이지 인쇄

Old Fashioned Gumball Machine

ASSEMBLY AND USE

Enjoying Your Old Fashioned Gumball Machine...Continued

CONTROLLING CANDY FLOW:

You may wish to alter the rate at which your product is dispensed. To do so:

1. Remove the cap lock, cap, nut, ring and gasket and the brush-off plate (6).

2. Next, adjust the dispensing wheel. If your wheel is not able to turn, your model may have the

wheel held in place with set screws. Simply loosen them enough for the wheel to turn, adjust

and then re-tighten.

3. Reassemble. Note: when reassembling, make sure the brush-off plate covers the candy

chute.

HOW TO ALLOW YOUR MACHINE TO

DISPENSE FREELY:

If you do not want to require your machine to be

coin-operated, first:

1. Disassemble the machine.

2. Lay the coin mechanism on its face, coin

slot down.

3. Take out the flat black spring (11) and brass

coin dog arm (12) from the back of the coin

mechanism and set aside. Do not discard,

as you may wish to convert back to coin

operation in the future.

GENERAL PRECAUTIONS:

ALWAYS USE CAUTION WHEN REASSEMBLING MACHINE. DO NOT OVERTIGHTEN SCREWS,

ESPECIALLY NEAR GLOBE AS GLOBE MAY BE DAMAGED.

ALWAYS WATCH SMALL CHILDREN WHEN AROUND MACHINE. NEVER LEAVE UNATTENDED

AROUND SMALL CHILDREN WHO MAY BE SUSCEPTIBLE TO CHOKING.

USE CAUTION WHEN FILLING GLOBE, POUR GENTLY TO LESSEN IMPACT ON GLASS.

NEVER CLEAN WITH ABRASIVE CLEANERS. USE MILD DETERGENT AND WATER.