Gaggenau AW240191 사용자 설명서 및 설치 지침 - 페이지 17
{카테고리_이름} Gaggenau AW240191에 대한 사용자 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau AW240191 20 페이지.
Establishing the exhaust air connection (exhaust air
pipe, 150 mm diameter)
Fit the exhaust air pipe directly to the air-pipe con-
▶
nector and seal the joint.
Establishing the exhaust air connection (exhaust air
pipe, 120 mm diameter)
Secure the reducing connector to the air-pipe con-
1.
nector.
Secure the exhaust air pipe to the reducing con-
2.
nector.
Seal the joints.
3.
Installing the flue duct
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
Wear protective gloves.
▶
WARNING ‒ Risk of electric shock!
Sharp-edged components inside the appliance may
damage the connecting cable.
Do not kink or trap the connecting cable.
▶
1.
Screw the retaining bracket for the flue duct to the
wall.
To separate the flue ducts, remove the adhesive
2.
tape or the flue duct from the protective packaging.
Remove any protective foil from both flue ducts.
3.
Note: The slots on the flue duct should point down-
4.
wards.
Use the 2 screws to screw the upper flue duct to
the sides of the retaining bracket.
Note: To prevent scratches, lay soft towels over the
5.
edges of the outer flue duct to protect the surface.
Place the lower flue duct on the appliance and pull
it slightly apart.
Put the lower flue duct over the upper flue duct.
6.
7.
Carefully remove the towels.
Installation instructions en
17