Gaggenau AW250192 사용자 설명서 - 페이지 9
{카테고리_이름} Gaggenau AW250192에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau AW250192 20 페이지. Extractor hood
Gaggenau AW250192에 대해서도 마찬가지입니다: 사용자 설명서 및 설치 지침 (20 페이지)
페이지 인쇄
¡ Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡ The current software and hardware version of your
appliance.
¡ Status of any previous reset to factory settings.
8 Hob-based hood control
You can connect your appliance to a suitable hob and,
in this way, control the functions of your appliance via
the hob.
If both appliances are Home Connect-compatible, the
easiest way to connect the appliances is in the
Home Connect app. To do this, connect the two appli-
ances to Home Connect and follow the instructions in
the app.
Alternatively, you have the following options for
connecting the appliances together:
¡ Connecting appliances together directly.
¡ Connecting appliances via the WLAN home net-
work.
Note: Please note the safety precautions in the instruc-
tion manual for your appliance and ensure that they are
also observed when operating the appliance via the
hob-based hood control.
Tip: Operating your appliance always takes priority. It is
not possible to use the hood controls on the hob dur-
ing this time.
Note: In networked standby mode, the appliance re-
quires a maximum of 2 W.
9 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
9.1 Cleaning products
You can obtain suitable cleaning products from after-
sales service or the online shop.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Before cleaning, pull out the mains plug or switch
▶
off the fuse in the fuse box.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
Allow the appliance to cool down before cleaning.
▶
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note: Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.
8.1 Connecting appliances together
directly
If your appliance is connected directly to the hob, it
cannot be connected to your home network as well
and you are no longer able to use Home Connect.
Requirements
¡ The appliance is switched off.
¡ All connections to the Wi-Fi or other appliances have
been reset.
→ "Resetting the connection", Page 8
Note: Refer to the section entitled "Hob-based hood
1.
control" in the instruction manual for your hob.
Switch on the hob and select the search mode.
Press and hold
until
2.
a The appliance is connected to the hob if
longer flashes, but lights up permanently.
8.2 Connecting appliances via the WLAN
home network (Wi-Fi)
1.
Connect the appliance to the home network.
→ Page 8
As soon as the appliance is connected to the home
2.
network, establish the connection to the hob via the
Home Connect app.
Follow the instructions on your mobile device.
3.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Do not use harsh or abrasive detergents.
▶
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Do not use any special cleaners for cleaning the ap-
▶
pliance while it is hot.
Only use glass cleaners, glass scrapers or stainless
▶
steel care products if recommended in the cleaning
instructions for the relevant part.
Wash sponge cloths thoroughly before use.
▶
Hob-based hood control en
starts to flash.
no
9