Great Outdoors A05714W 조립 및 사용 설명서 - 페이지 7

{카테고리_이름} Great Outdoors A05714W에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Outdoors A05714W 18 페이지. X-series portable gas grill

페이지 인쇄

Take These Instructions to the L.P. Gas Dealer

When using a cylinder exchange, be sure the

exchanged cylinder is a Type 1 cylinder; a 510

POL cylinder will not fit a Type 1 regulator.

FILLING AND PURGING

TYPE 1 L.P. GAS CYLINDERS

DANGER:

Purging and filling of L.P. gas

cylinders must be performed by personnel who

have been thoroughly trained in accepted L.P.

gas industry procedures. Failure to follow this

instruction may result in explosion, fire, severe

personal injury or death.

IMPORTANT:

Purge new cylinders before

filling. This tank is easily filled with a standard

CGA 510 POL filling connection.

CGA-510 POL

Filling a Type 1 Cylinder Valve

Example A: shows a CGA-510 POL fitting.

Example B: shows using a Type 1 POL fitting.

Type 1

(cut away to see fitting)

The L.P. gas cylinder has a Type 1 cylinder

valve with a back-check module in its outlet

that will not permit gas to flow until an

evacuation device is installed. To purge the

L.P. gas cylinder, the back-check module must

be opened with an evacuation device.

PURGING AND EVACUATION DEVICES

FOR L.P. GAS CYLINDER WITH TYPE 1

CYLINDER VALVES

A. Hose-end valve with a bleed port: Purging

can be accomplished using a hose-end valve

containing a bleed port, which also allows for

evacuation without the use of an adapter.

B. Hose-end valve without a bleed port:

When a hose-end valve does not have a bleed

port, a separate device must be used for

evacuation.

C. Purging using a Type 1 connection: L.P.

gas cylinder evacuation can be accomplished

during each purging by using a Type 1

connection. The Type 1 valve outlet has 1-

5/16" external ACME right-hand thread that will

accept this connection.

CAUTION:

cylinder, do not insert a POL plug into the

Example A

valve outlet. Insertion of this plug will prevent

the back-check from closing. Use ONLY the

provided cap and strap attached to the outlet.

Close the cylinder valve knob before returning

the cylinder to the customer.

For proper purging procedures in the USA,

refer to: Safety Bulletin NPGA # 133, "Purging

L.P. Gas Cylinders," and Safety Bulletin NPGA

#130, "Recommended Procedures for Filling

Cylinders."

DANGER:

beyond 80% full. If this information is not

followed exactly, a fire causing serious injury

or death may occur.

Example B

After purging or filling an L.P. gas

Do not fill an L.P. gas cylinder