Gaggenau VL040-707 작동 및 조립 지침 매뉴얼 - 페이지 13

{카테고리_이름} Gaggenau VL040-707에 대한 작동 및 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau VL040-707 15 페이지. Hob ventilator
Gaggenau VL040-707에 대해서도 마찬가지입니다: 작동 및 조립 지침 매뉴얼 (15 페이지)

페이지 인쇄

Fig. 11

All manuals and user guides at all-guides.com

– Lower the appliance into the worktop. Make

sure that the engaging lugs on the appliance

lie exactly on the clamping springs. Press the

appliance firmly into the worktop. The engaging

lugs on the appliance "snap" into the clamping

springs.

– Screw the included screw from below into the

hooked-in retaining bracket (fig. 11). Fit the cap

onto the top of the screw.

– Fully screw in the screw.

– Connect the hob ventilator to the fan module by

means of the 4-pole plug.

Pay particular attention to ensuring that

– the exhaust air ducts are kept as short as possible

– the pipes are not laid at an acute angle, but as

bends and that they are inserted into the shaft at

an inclined upward angle and

– there are no cross-sectional constrictions in the

upward direction (this reduces the volume flow).

We recommend the use of our telescopic wall box

TM 180-043 to route exhaust air through the outside

wall.