Gaggenau CE291 Series 사용 설명서 - 페이지 12
{카테고리_이름} Gaggenau CE291 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau CE291 Series 16 페이지. Glass
Gaggenau CE291 Series에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)
페이지 인쇄
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Switching on the kitchen timer
You can switch the kitchen timer on in 2 different ways:
▯
If a hotplate has been selected, touch the symbol
M
twice within 10 seconds.
▯
If a hotplate has not been selected, touch the
symbol.
V
The
indicator lights up.
Setting the kitchen timer
Set the required time in the settings range.
When the time has elapsed
After the time has elapsed, you will hear an audible
‹‹
signal.
lights up in the timer indicator. The indicator
V
for the kitchen timer lights up brightly. The indicator
switches off after 10 seconds.
Displaying the time
M
Use the
symbol to select the kitchen timer. The time
is displayed for 10 seconds.
Setting the correct time
M
Use the
symbol to select the kitchen timer and reset
the time.
12
Safety shut-off
If a hotplate is switched on for a long time without the
setting being changed, the automatic safety shut-off is
activated.
The hotplate stops heating.
heat indicator flash alternately on the hotplate indicator.
The indicator goes out when you touch any control. You
M
can implement new settings.
The point at which the safety shut-off becomes active (1
to 10 hours) depends on which heat setting has been
set.
Wipe protection
If you wipe over the control panel while the cooktop is
switched on, settings may be altered.
To prevent this from happening, your cooktop has a wipe
protection function. Touch the
signal sounds. The indicator light above the
lights up. The control panel is locked for 30 seconds.
You can now wipe over the control panel without altering
any settings.
Note: The main switch is excluded from the wipe
protection function. You can switch off the cooktop at
any time.
"‰
•
œ
and the
/
residual
−
symbol. An audible
−
symbol