Hi-Target Qstar Series 제품 사양 및 설명서 - 페이지 14
{카테고리_이름} Hi-Target Qstar Series에 대한 제품 사양 및 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Target Qstar Series 18 페이지. High precision mobile gis
페이지 인쇄Take out the battery, take out the screw firstly, the battery will popup little, then you can take it out.
◊ Qstar series high precision mobile GIS product
Table 3-1 Qstar series high precision mobile GIS product battery, charger model
name
8800 mAh lithium batteries
Lithium battery charger
◊charge
When charging, the charger should be specialized charger with standard configuration or seat
charger in certain temperature range, and charging time should achieve a certain requirements.
The concrete use method and requirements:charging with standard configuration is demanded
when charging the Qstar series high precision mobile GIS product,charge in 10 ℃ ~ 40 ℃
temperature range. Using for the first time in general, there should be some battery power, you
should use up the inside electricity before charging again, the first three charging must achieve12
hours, after that charging 6 hours. If the battery is not often in use, it must be charged once a
month.
Warning: 1The battery and charger manufacturer configuration are only permitted, do
not put it into the fire or metal electrodes with short circuit.
2 If you find the battery has fever, deformation, discharge, smell or other abnormal
phenomenon when the battery is in use 、in charge or in storage, please replace new
battery.
3 If the use time of the battery significantly shortened, please stop using the battery,
the battery is aging, please replace new battery.
Switch machine operation
◊
Boot
In the shutdown state, long press
battery, charger model number
three seconds, it will boot.
model
BL-8800A
CL-00A