Gaggenau VG 231 AU 작동 및 조립 지침 매뉴얼 - 페이지 16

{카테고리_이름} Gaggenau VG 231 AU에 대한 작동 및 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau VG 231 AU 19 페이지. Gas cooker
Gaggenau VG 231 AU에 대해서도 마찬가지입니다: 설치 지침 (4 페이지)

페이지 인쇄

8.3 Nozzle replacement

Fig. 8

Fig. 9

Fig. 10

Changing over to a different gas type

Only authorised specialists are permitted to

change over to a different gas type. The nozzles

needed for the gas type to be set are available as a

conversion kit. Please specify the appliance type

and the required gas type.

– Disconnect the appliance from the power

supply.

– Remove the pot support, the burner ring, the

burner cover and the burner head.

– If the appliance is connected rigidly to a gas

main, it must be disconnected from the gas

network. If it is connected via a gas safety hose,

the appliance only needs to be pushed out of its

mount from below and taken out of the worktop.

– Undo the securing nut (SW 11) of the

thermocouple and the two securing screws that

become visible under the detached burner head

(Fig. 8).

– Remove the hob.

– Pull off the control knob. After undoing the

securing screws (1) on the left and right (Fig. 9),

you can remove the control panel by lifting (2)

and pushing (3) it out of the latch (Fig. 10).