Dayens Menuetto 사용자 설명서 - 페이지 4

{카테고리_이름} Dayens Menuetto에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dayens Menuetto 5 페이지.

URC1 code setting for Dayens Menuetto

1. Four-digit code for your amplifier remote control is 0563.

2. Press and hold the SET button then press the AUX button.

3. Release all buttons as soon as the red LED located next to the SET button goes on.

4. Enter the mentioned four-digit code (0563) within 10 seconds.

If the code is valid, the LED goes out. If the code you entered is invalid (e.g. 0777),

the LED will stay on after two rapid flashes. You can now re-enter the code.

5. Direct the remote control toward the amplifier you have previously turned on,

and try if the volume control works.

6. Enjoy!

Warranty and Service

We are carefully manufacturing and testing our products with goal to keep the failure rate

to a minimum; however, it is possible that something may go wrong.

If you have any problems with your product, contact us directly at [email protected] and

describe your problem in detail.

Warranty covers normal function of the product and starts from the date of purchase.

Our warranty does not apply:

- to damage caused during transport or by accident, abuse, misuse, misapplication, etc.

- to damage caused by service performed by unauthorized person;

- to a product or a part that has been modified in any way without our permission;

Customer will bear the expense of shipping the product to our service, including the

shipment, and all taxes, duties, and other customs fees.

After expiry of the warranty period we will provide replacement parts and service.

All repairs performed by Dayens after expiry of the warranty period will be charged to

the owner and the cost will include only serviced/replaced parts and components and will

carry a 180-day warranty on parts and labor.

No User Serviceable Components Inside.