Gaggenau VG295150IN 사용자 설명서 - 페이지 9
{카테고리_이름} Gaggenau VG295150IN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau VG295150IN 16 페이지. Built-in gas hob
페이지 인쇄
6
Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Placing burner parts and pan supports
in their correct positions
Place all burner parts and pan supports in their cor-
▶
rect positions.
→ "Fitting burner parts", Page 10
7
Cookware
This information has been provided to help you save energy and avoid damaging your cookware.
7.1 Suitable cookware
Only use cookware with a suitable diameter. The cookware must not overhang the edge of the hob.
Burner
Standard-output burner
High-output burner
Wok burner
7.2 Using cookware
The selection and positioning of the cookware affects
the safety and energy efficiency of your appliance.
WARNING ‒ Risk of fire!
Flammable objects may ignite.
Maintain a distance of at least 50 mm between the
▶
cookware and flammable objects.
WARNING ‒ Risk of injury!
An incorrectly positioned wok may cause injuries. The
wok is not stable and may overturn.
Use the wok only on the wok burner and the wok
▶
ring. Never set the wok ring and wok on the stand-
ard output burner and high-output burner.
Maximum pan base diameter
200 mm
220 mm
320 mm
¡ Ensure that the size of
the cookware is suit-
able for the burner
size.
¡ Never use small cook-
ware on large burners.
¡ Ensure that the flame
does not touch the
sides of the cookware.
¡ Do not use deformed
cookware.
¡ Deformed cookware is
not stable on the cook-
top and may tip over.
¡ Use cookware with a
thick, flat base.
Before using for the first time en
6.2 Do not cover ventilation openings
Do not cover the ventilation openings on the rear of
▶
the gas hob.
→ "Familiarising yourself with your appliance",
Page 7
Minimum pan base diameter
90 mm
90 mm
160 mm
¡ Do not cook without a
lid.
¡ Ensure that the lid
does not move.
¡ When cooking without
a lid, a large amount
of the energy escapes.
¡ Position the cookware
in the middle of the
burner, otherwise it
may tip over.
¡ Do not position large
cookware on the burn-
ers close to the con-
trols.
¡ Maintain a minimum
clearance of at least
50 mm between the
control knob and the
cookware. The con-
trols may be damaged
due to overheating.
¡ Place the cookware on
the pan supports.
¡ Never place the cook-
ware directly on the
burner.
¡ Before using the appli-
ance, ensure that the
pan supports and the
gas burner covers are
positioned correctly.
9