Gaggenau VG491215AU 사용 설명서 - 페이지 15

{카테고리_이름} Gaggenau VG491215AU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau VG491215AU 16 페이지.

페이지 인쇄

Notes

–

Each time the mains power is switched on or

following a power failure, a sound is produced

when the gas valves are started up. The illuminated

rings around the control knobs will be lit green for a

few seconds and then turn yellow. Wait until the

illuminated rings switch off.

–

When the gas cooktop is switched on, the

electronics open up the gas supply, which

produces a short sound. A sound can also be heard

when the setting is changed. This is normal.

Demo mode

The demo mode is activated if all of the illuminated rings

around the control knobs light up white for 10 seconds

after switching on the appliance. The burner does not

ignite. The illuminated ring around the active control

knob lights up orange.

You can deactivate the demo mode as follows:

Turn all of the control knobs to 0. Disconnect the

appliance from the mains power supply. Wait at

least 30 seconds.

Reconnect the appliance. The illuminated rings

around the control knobs light up green for a few

seconds and then turn yellow. Wait until the

illuminated rings switch off.

Then deactivate demo mode within three minutes as

follows:

Turn any of the control knobs anti-clockwise to

position 12.

Turn the control knob clockwise to position 1.

Turn the control knob anti-clockwise to position 0.

Wait until the illuminated ring lights up yellow.

Turn the control knob clockwise to position 1. The

illuminated ring lights up green.

Wait for five seconds. The illuminated ring now

turns yellow.

Demo mode has now been deactivated. To save the

setting, always exit the menu as follows:

Turn the control knob to 0. Then turn the control

knob anti-clockwise to position 12. Turn the control

knob clockwise to position 1. Turn the control knob

anti-clockwise to position 0. Wait until the

illuminated ring goes out.

After-sales service

O ur after-sales service is there for you if your appliance

A f t e r - s a l e s s e r v i c e

needs to be repaired. We will always find an appropriate

solution, also in order to avoid after-sales personnel

having to make unnecessary visits.

E number and FD number

When calling us, please quote the full product number

(E no.) and the production number (FD no.) so that we

can provide you with the correct advice. The rating plate

that features these numbers can be found on the

underside of the appliance.

To save time, you can make a note of the numbers for

your appliance and the telephone number of the after-

sales service in the space below in case you need them.

E no.

After-sales service O

Please note that a visit from an after-sales service

engineer is not free of charge in the event that the

appliance has been misused, even during the warranty

period.

Please find the contact data of all countries in the

enclosed customer service list.

To book an engineer visit and product advice

0344 892 8988

Calls charged at local or mobile rate.

01450 2655

0.03 € per minute at peak.

Off peak 0.0088 € per minute.

1300 368 339

09 477 0492

Trust the expertise of the manufacturer, and rest

assured that the repair will be carried out by trained

service technicians using original spare parts for your

domestic appliance.

After-sales service

FD no.