Hi-Tech BRENNA HTW-07-B-C 소유자 지침 - 페이지 5
{카테고리_이름} Hi-Tech BRENNA HTW-07-B-C에 대한 소유자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Tech BRENNA HTW-07-B-C 6 페이지. Water filtration device
페이지 인쇄FILTER REPLACEMENT
Filter Replacement Cycle
The filter replacement cycle described above is not the filter quality warranty period but the
expected cycle (life) that the filter shows its original performance.
(Based on the tap water) Therefore, the filter change cycle may be reduced for the area with
poor water quality or more applications.
▶
Brenna, P-07QL
Usable Period
Filter name
Neo-sense filter
6 months
Membrane filter (RO)
24 months
Post-Carbon bloc filter
18 months
Ceramic filter
12 months
Filter Replacement Method
1. After pulling the power cord
necessarily (Brenna only), close
the main water supply valve and
drain the water inside of the water
purifier completely (See P .7).
2. Please separate the top cover and
the front cover. (After blocking the
main water extraction hole using the
faucet stopper in the top of the inner
water tank and loosing a screw with
a driver, separate it.)
3
▶
- Don't push the cup-touch lever with the excessive force.
- Product damage may occur as a result.
Tips
7
7
▶
P-07QU
Usable Period
Filter name
Neo-sense filter
6 months
Post-Carbon bloc filter
18 months
Membrane filter (UF)
12 months
Ceramic filter
12 months
▶
2
1
▶
5
▶
4
3. Separate the fitting connected
to the filter to replace and then
replace the filter. (Separate the
fitting using an appropriate tool.)
- By changing the filter and connecting the fitting and the hose precisely, check
that there is no leakage and drain the first purified water necessarily.
Tips
4. After closing with fitting the groove
in the front cover well, drop the
cup-touch lever and the sliding front
deco. Plug in the faucet stopper
blocked the faucet again in place
and close the top cover.
Use the new filter after cleaning.
- Neo sense filter: Install after cleaning with the main water for about 3 minutes.
- Post-Carbon block filter: Install after cleaning with the water passed the Neo
sense filer for about 3 minutes.
Tips
- Membrane filter: Install after cleaning with the water passed the Neo sense filer
for about 3 minutes.
▶
▶
8