Gaggenau VI 230 112 사용 설명서 지침 - 페이지 9

{카테고리_이름} Gaggenau VI 230 112에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau VI 230 112 15 페이지.

페이지 인쇄

The Booster

function

Limits on use of the

Booster function

Heating-power

setting

characteristics

table

The booster function gives the respective hotplate

150% of the maximum heating power and therefore

requires watching when in operation. It is used for

quick heating, e.g. frying grease. After heating, reduce

the heat setting to save energy and prevent ignition of

frying medium.

To activate this function, set the respective hotplate

switch to setting 9.

Set the switch to another position, when you no longer

require this setting.

Connecting the "Booster" function:

In order to connect the "Booster" function, turn the

control knob for

doing, the knob will automatically go back to 9.

The signal will light up to indicate that this position has

Fig. 5

been activated.

Disconnecting the "Booster" function:

In order to disconnect the "Booster" function, turn the

control knob to any position other than 9.

❏ The "Booster" function can only be activated on a

❏ The cooking hob may turn the Booster function off

, fig. 5, and release the knob. On so

cooking area when the other area on the hob has

been turned off. If the other cooking area is not off,

then the "Booster" function indicator will flash and

finally go out altogether, indicating that the function

cannot be used.

automatically under certain conditions in order to

protect interior electronic components. Should this

occur, the function has to be turned on once more; if

the control indicator remains flashing after the

function has been turned off automatically, it is

necessary to wait a few minutes before trying to turn

the function back on again.

Heating power setting

Booster

Approx. percentage of ma.

heating power setting

0 %

3,5 %

6,5 %

9,5 %

15,5 %

20,5 %

25 %

47 %

72 %

100 %

150%