GREAT PLAINS 3N-4010HDA 매뉴얼
{카테고리_이름} GREAT PLAINS 3N-4010HDA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLAINS 3N-4010HDA 5 페이지.
페이지 인쇄FOLDING
N
T
O-
Air DRILL
3N-4010HDA
Proper servicing and adjustment is key to the long life of all farm equipment.
With careful and systematic inspection of your grain drill, you can avoid costly
maintenance, time and repair.
1.) After several hours of operation inspect all bolts and hydraulic fittings for
looseness or leakage. Refer to torque chart in your operator's manual.
2.) Reference the operator's manual section 5 for all grease locations and intervals.
1). Attach the unit to the tractor and air drill cart. Be certain to properly attach the
hydraulic couplers, as outlined in the operator's manual.
2). Be certain that all wiring harnesses are attached and functioning correctly.
3). Install all monitors and drive console power leads to the battery (12-volt only).
DO NOT ATTACH ANY ELECTRONIC DEVICE TO THE TRACTOR IN
CAB POWER PORT. DOING SO WILL VOID THE WARRANTY OF THE
ATTACHED COMPONENTS.
4). Refer to the monitor section of the operators manual to get the proper cal
number for the crop to be planted.
5). Place seed in the cart bin and perform the calibration function as outlined in
the operator's manual.
12-08
ILL
DRILL MAINTENANCE
ADJUSTMENTS BEFORE
GOING TO THE FIELD
3-SECTION