70mai TPMS Lite 사용자 설명서 - 페이지 2

{카테고리_이름} 70mai TPMS Lite에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 70mai TPMS Lite 19 페이지. Tire pressure monitoring system

Thank you for choosing the 70mai Tire Pressure Monitoring System Lite (TPMS Lite).

The 70mai TPMS Lite can monitor tire pressure and temperature in real-time and send the data

to a receiver wirelessly through radio frequency. After processing the data, it is shown on the

display. In case of any abnormality based on the standard pressure and temperature alarm

settings, the system will issue an alarm to alert the user.

Precautions

1. The 70mai TPMS Lite monitors tire pressure and temperature, but cannot prevent tire leakage

and puncture. It is equally important to use good-quality tires. When the receiver issues an alarm,

stop the car safely and check the tires. Send the car to a workshop for servicing if necessary.

2. Installation and use of the 70mai TPMS Lite cannot replace regular maintenance and

inspection of the car. Car owners are responsible for the safety of their cars.

3. The receiver must be installed in the correct position and must not obstruct the view of the driver.

It should be installed securely to prevent unwanted movement while the car is travelling.

4. Do not operate the 70mai TPMS Lite while driving. Failure to concentrate on the road may

result in traﬃc accidents. Drivers are responsible for all associated risks and liabilities.

5. The 70mai TPMS Lite can inspect the tires and issue alarms automatically without the driver' s

intervention. Drivers should focus their attention on the road.

6. Due to thermal expansion and contraction, tire pressure and temperature may become higher

or lower when the car is in motion. This is normal.

7. Air leaks from tires naturally, so tire pressure will decrease over time. This is normal and is not a

result of using the 70mai TPMS Lite.

8. Incorrect installation may aﬀect the operation of the 70mai TPMS Lite and may even result in

damage. Please install the 70mai TPMS Lite at a workshop or with the help of a qualiﬁed technician.

9. The battery of the receiver may deplete when the 70mai TPMS Lite is not used for a prolonged period

of time. In such cases, charge the receiver using a USB cable before using the 70mai TPMS Lite.

10. Strong impact or vibration may damage the 70mai TPMS Lite and prevent it from operating or

being used normally.

11. Do not clean the 70mai TPMS Lite using chemical solvent or detergent.

12. The car manufacturer will provide referential tire pressure values. As the weight distribution

and tire speciﬁcation for each car model is diﬀerent, the recommended tire pressure for the

front wheels and back wheels, and at no load and full load would be diﬀerent. Users can ﬁnd

such information on the car door of the driver' s seat (near pillar B), inside the fuel tank cover

or in the car manual.

13. Sometimes, the receiver may not display any data or is slow in displaying the data. Do not

worry, this is the result of the data transmission strategy of the sensors. In order to prolong the

sensors' service life and the sensors will not transmit data uninterruptedly, but will only do so

when the car reaches a certain speed or when there is a signiﬁcant change in tire pressure or

temperature in a short period of time.

14. When the receiver issues a buzzer alarm, stop the car safely at the side of the road as soon as

possible and check your tires.

15. The pressure and temperature values for the four tires shown on the receiver may be diﬀerent.

This is normal and the result of diﬀerent wear and tear of each tire.