Hi-Tech ZycoTherm 사용자 설명서 - 페이지 10

{카테고리_이름} Hi-Tech ZycoTherm에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Tech ZycoTherm 12 페이지.

Page 9

Print Options Screen

This is the Print Options screen. It will allow you to adjust the printing options for reports should

you have a printer attached.

You can set the date and time here, set how often a report will be printed, and print a test

print to make sure the printer is working.

BAUD RATE – This is the rate at which the controller communicates with the external printer.

The rate on the controller must match the rate on the printer to obtain a readable printout. The

controller can communicate with any printer through a serial RS232. Please note that all

reports and information are also being sent to the micro SD card at the rear of the touch

screen. This information will be recorded on the SD card with or without a printer attached. By

default it will record to the SD card in one minute intervals.